4pcs DC Electric Motor 3-6V Dual Shaft Geared TT Magnetic Gearbox Engine with 4Pcs Plastic Toy Car Tire Wheel, Mini Φ67mm Smart RC Car Robot Tyres Model Gear Parts, Yeeco

#ad
Yeeco #ad - 4pcs DC Electric Motor 3-6V Dual Shaft Geared TT Magnetic Gearbox Engine with 4Pcs Plastic Toy Car Tire Wheel, Mini Φ67mm Smart RC Car Robot Tyres Model Gear Parts, Yeeco #ad - Great for rc car DIY or other electronic production. Motor rate voltage: dc 3v-6v reduction ratio: 1:48 3V-170mA; 115RPM, 07kgf. Cm torque -tire material: Plastic Size of the motor: 64. 2x22. 5x22. 5mmwithout the shaft Diameter of the tire: 67mm/2. 6" width of the tire: 27mm/1. 06" package include: 4xelectric Motors 4xPlastic Tires 4pcs yellow electric motor with 1:48 reduction ratio.

Size of the tire: outsideΦ67mm/2. 6"; width 27mm/1. 06". Also compatible with the motor whose reduction ratio is 1:1204-piece plastic tires with tread pattern.

#ad



Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

#ad
Qunqi MK-050-2 #ad - When ena enable in1 in2 control out1 out2 when enb enable in3 in4 control OUT3 OUT4 Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.

Qunqi 2Packs L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino #ad - Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. Specification: chip: l298n logic voltage: 5v logic current 0ma-36ma storage temperature: -20 ℃ to ℃ to +135 operating mode: h-bridge driver dual drive voltage: 5v-35v drive current: 2A MAX single bridge Maximum power: 25W Dimensions: 43x43x27mm Package include: 2x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.

#ad



HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi

#ad
HiLetgo 3-01-0506 #ad - The pull-down resistor ensures that the motor remains stopped at power-up 5. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip.

Using this chip you can use dc motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel. Tested compatible for Arduino Mega, Diecimila & Duemilanove. 2 interface for 5v servo connected to the Arduino's high-resolution dedicated timer - no jitter.

HiLetgo L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board for Arduino Duemilanove Raspberry Pi #ad - Multi-function, easy to operate, a strong driver library support and feature updates. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Download easy to use software library for rapid project development Package Included: 1*L293D Motor Driver Shield Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Up to 2 stepper motor forward and reverse control, single / double step control, staggered or micro-step and rotation angle control 3.

2 large terminal external power terminals, to ensure logic and motor drive power separation 8.

#ad



Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino

#ad
Qunqi CECOMINOD012186 #ad - High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip. Using this chip you can use dc motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.

Tested compatible for Arduino Mega, Diecimila & Duemilanove. 2 interface for 5v servo connected to the Arduino's high-resolution dedicated timer - no jitter. Multi-function, easy to operate, a strong driver library support and feature updates. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.

Qunqi L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino #ad - Specification: chip: l298n logic voltage: 5v logic current 0ma-36ma storage temperature: -20 ℃ to ℃ to +135 operating mode: h-bridge driver dual drive voltage: 5v-35v drive current: 2A MAX single bridge Maximum power: 25W Dimensions: 43x43x27mm Package include: 1x L298N Module Note: This module has a built-in 5v power supply, when the driving voltage is 7v-35v, this supply is suitable for power supply DO NOT input voltage to +5v supply interface, however ledding out 5v for external use is available.

Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.

#ad



PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers Black

#ad
Pixnor 4332013342 #ad - High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip. Using this chip you can use dc motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.

Tested compatible for Arduino Mega, Diecimila & Duemilanove. 2 interface for 5v servo connected to the Arduino's high-resolution dedicated timer - no jitter. Multi-function, easy to operate, a strong driver library support and feature updates. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

PIXNOR 10pcs L293D DIP 16-pin IC Stepper Motor Drivers Controllers Black #ad - Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Pin no: 16 pins. Ven enable Voltage: 7V. Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability.

Logical /0/ input voltage up to 1.

#ad



TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Projects

#ad
TIMESETL L298N motor controller #ad - Over temperature protection. Just wire up motors and power, easy to use. Material: durable hard alloy and plastic. L293d dip 16-pin ic stepper Motor Drivers Controllers. Channel capability: 600mA output current channel. Peak output current: 1. 2a channel non repetitive. Enable facility. Parameter external size 43*43*27mm / 1.

69*1. 69*1. 06 inch, voltage 5v-35V, drive current 2A Max single bridge. L298n of timesetl timesetl motor drive controller - high Quality Specification: Size: 43*43*27mm/ 1. 69*1. 69*1. 06 inch dual h bridge drive can drive 2 dc motors chip: l298n logical voltage: 5v drive voltage: 5v-35v logic current: 0ma-36ma drive current: 2afor each dc motor weight: 30g TIMESETL L298N DC Stepper Motor Drive - Usage Great for Arduino, etc If driving voltage is more than 12V, Mega 2560, Smart Car, MEGA R3, Power UNO, please use external 5volt logic outputs to switch the H-bridge circuits.

TIMESETL 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Electric Projects #ad - Delivery 5 x l298n stepper motor controller Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.

High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w.

#ad



ELEGOO 5PCS HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee

#ad
ELEGOO EL-SM-001 #ad - The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse. Is a professional manufacturer and exporter that is concerned with the design, 3d printers, development production and marketing of arduino, raspberry pi and STM32.

Elegoo Inc. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object. Power supply :5V DC quiescent current :. Ultrasonic hc-sr04 distance measuring Transducer Sensor HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. So we would like to receive your valuable suggestions for our products and we can improve them for you.

ELEGOO 5PCS HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee #ad - Our dream is to make the best price and best quality produce for customers.

#ad



HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560

#ad
HiLetgo® #ad - Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Dual-channel H-bridge driver working mode creates higher working efficiency.

Package content: 5pcs HC-SR04 with a little gift. Ultrasonic hc-sr04 distance measuring transducer sensor. Package included: 4* l298n motor driver controller Board ModuleThere are two ways to turn the system back on:1. Unconventional application of high-voltage drive: when the driving voltage is higher than 12V, less than or equal to 24V, to drive a motor with rated voltage of 18V, for example, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.

HiLetgo 4pcs L298N Motor Driver Controller Board Module Stepper Motor DC Dual H-Bridge for Arduino Smart Car Power UNO MEGA R3 Mega2560 #ad - Hc-sr04 consists of ultrasonic transmitter, receiver, and control circuit. This l298n board comes ready to go. 3 cm~. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip.

#ad



Ogrmar On/Off Switch 4 x 1.5V AA Battery Case Holder Leads Black w Cap 2Pcs

#ad
Ogrmar 5582712784 #ad - Wide usage great for for arduino diy smart car robot power uno mega r3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits. Battery type : 4 x aA 6V;Color : Black. Dual-channel H-bridge driver working mode creates higher working efficiency.

High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable. This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip. Using this chip you can use dc motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel.

Ogrmar On/Off Switch 4 x 1.5V AA Battery Case Holder Leads Black w Cap 2Pcs #ad - Tested compatible for Arduino Mega, Diecimila & Duemilanove. 2 interface for 5v servo connected to the Arduino's high-resolution dedicated timer - no jitter. Multi-function, easy to operate, a strong driver library support and feature updates. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Product name : Battery Case.

#ad



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - Dual-channel H-bridge driver working mode creates higher working efficiency. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip.

Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage. Package content : 2 x Battery Case Holder w Cover. Wide usage great for for arduino diy smart car robot power uno mega r3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Just wire up motors and power, easy to use. We have the manufacture factory, making productions and selling by ourselves. We’d like to receive your valuable suggestions for our products and make your idea come true. To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.

Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Package content: 5pcs HC-SR04 with a little gift. 3 cm~.

#ad



OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot

#ad
Shenzhen Vership Co. LTD LYSB01I57HIJ0-ELECTRNCS #ad - Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability. Package content: 5pcs HC-SR04 with a little gift. The ir infrared obstacle avoidance Sensor Module detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use.

Wide usage great for for arduino diy smart car robot power uno mega r3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits. High working power to 35v, large current can reach 3A MAX and continue current is 2A, power to 25w. Large capacity filter capacitance, afterflow protection diode, more stable and reliable.

This is a commonly used dc motor drive module, using a small current 293 chip DC motor driver chip. Using this chip you can use dc motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel. Tested compatible for Arduino Mega, Diecimila & Duemilanove.

OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot #ad - 2 interface for 5v servo connected to the Arduino's high-resolution dedicated timer - no jitter. Multi-function, easy to operate, a strong driver library support and feature updates. Dual-channel h-bridge driver working mode creates higher working efficiency, L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors.

#ad