Bertech ESD Common Point Grounding Cord, with 10mm Male Snap, 1 meg Resistor and a 15′ Cord

#ad
Bertech CGC151M #ad - Meets or exceeds requirements of ansi ESD-S2020 and ansi/esd S-6. 1. A common point ground is standard with two banana jacks, 10mm male snap. A common point ground is made from rugged vinyl and comes standard with 15' cords. They are available with a large O-ring for military applications or with a bull dog clip for field service mats.

Meets or exceeds requirements of ANSI ESD-S2020 and ansi/esd S-6. 1. Designed for an electronic assembly where static charge is a concern. Used to prevent electrostatic discharge by safely grounding a person working with electronic equipment or at an electronic assembly facility. Bertech esd common point grounding Cords are standard with two banana jacks, a 10mm male snap, and a 1 meg resistor.

Bertech ESD Common Point Grounding Cord, with 10mm Male Snap, 1 meg Resistor and a 15' Cord #ad - These grounding cords are made from rugged vinyl and come standard with 15-feet cords.

#ad



Bertech ESD High Temperature Rubber Mat Roll 2.5' Wide x 20' Long x 0.08" Thick, Gray

#ad
Bertech 2059T-2.5x20G #ad - Made of two Layer Rubber Material. 008 inches Thick. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. Rohs Compliant. Bertech esd high Temperature Mat Rolls are. 08 inches thick and have two layers. Excellent resistance to hot solders, soldering irons, and most solvents. Esd high temperature mats offer excellent resistance to oil, grease, and most common solvents.

Rohs Compliant. This mat is very light compared to our single layer and three layer mats. The top layer is a gray static dissipative rubber layer laminated to a black conductive rubber bottom layer.

#ad



DESCO 09864 Pack of 2 Universal SNAP MOUNTING KIT

#ad
Desco #ad - Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. 09864 pack of 2 desco. Desco 09864 pack of 2 universal snap mounting kit. Rohs compliant: NA. 008 inches Thick. Price for: each kit contents: 10mm stud, long & short screws & esd common point ground Symbol Label For Use With: Antistatic Mats RoHS Compliant: NA Excellent resistance to hot solders, 10mm Socket, soldering irons, and most solvents.

Made of two Layer Rubber Material. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Each kit contents: 10mm Stud, 10mm. Rohs Compliant.

#ad



Bertech - 18" Wide x 30" Long x 0.08" Thick, Blue ESD High Temperature Rubber Mat Kit with A Wrist Strap and A Grounding Cord

#ad
Bertech 2059T-18x30BKT #ad - Each kit contents: 10mm Stud, 10mm. 008 inches Thick. Assembled in USA. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. Excellent resistance to hot solders, soldering irons, and most solvents. Resistance-to-ground is 8 x 10e6 -10e8 and Resistance Point-to-Point is 2 x 10e6 -10e8.

Rohs Compliant. These mat kits include a mat, common point ground cord, and an adjustable fabric wrist strap. Made of two Layer Rubber Material. This mat is very light compared to our single layer and three layer mats. Kit includes a wrist strap and a grounding cord. Rohs Compliant. 09864 pack of 2 desco. 08" thick and have two layers; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer.

Bertech - 18" Wide x 30" Long x 0.08" Thick, Blue ESD High Temperature Rubber Mat Kit with A Wrist Strap and A Grounding Cord #ad - Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Desco 09864 pack of 2 universal snap mounting kit. Made of Rubber Material. Esd anti static safe: Designed for an electronic assembly where static charge is a concern.

#ad



Vastar ESD Anti-Static Wrist Strap Components, Blue

#ad
Vastar VRK14-ALX-1 #ad - It is a good helper for electronic maintenance engineers. 008 inches Thick. Rohs Compliant. Industrial-grade wrist Strap】High safety, strong electrical conductivity can effectively make static electricity flow away. Adjustable wrist strap Buckle】 These wrist straps can be adjusted freely for your wrist comfortably.

Extra-long coiled cord】 line length 1. 9m, full of flexible, it can effectively increase the optimal freedom of movement. Stainless steel alligator clip 】Strong clamping force, firm and not easy to fall off, improve work efficiency. Wide range of applications】anti-static wristband is an economical and practical model introduced by VASTAR.

Vastar ESD Anti-Static Wrist Strap Components, Blue #ad - Desco 09864 pack of 2 universal snap mounting kit. Esd anti static safe: Designed for an electronic assembly where static charge is a concern. It is suitable for factory environment, electronic maintenance, dust-free workshop and other static environment. Adjustable strap fits your wrist comfortably. Protect your pc from static electricity.

Assembled in USA. Kit includes a wrist strap and a grounding cord. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats.

#ad



MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip

#ad
MG Chemicals 8341-10ML #ad - Made of two Layer Rubber Material. No clean Flux Paste. Thixotropic paste; RoHS compliant. Instant wetting. Kit includes a wrist strap and a grounding cord. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. Flux paste is a no clean formulation therefore the residues do not need to be removed for most applications.

Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies. Esd anti static safe: Designed for an electronic assembly where static charge is a concern. 09864 pack of 2 desco. After soldering, moisture resistant, non conducting, the rosin residue is non corrosive, and fungus resistant.

MG Chemicals 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser Complete with Plunger & Dispensing Tip #ad - Compatible with lead free and leaded solder systems. Rohs Compliant. Resistance-to-ground is 8 x 10e6 -10e8 and Resistance Point-to-Point is 2 x 10e6 -10e8. 008 inches Thick. Excellent resistance to hot solders, soldering irons, and most solvents. It is suitable for factory environment, electronic maintenance, dust-free workshop and other static environment.

Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats.

#ad



Hakko 599B-02 Wire-type soldering iron tip cleaner

#ad
Hakko 599B-02 #ad - Desco 09864 pack of 2 universal snap mounting kit. Made of Rubber Material. Instant wetting. Esd anti static safe: Designed for an electronic assembly where static charge is a concern. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. Excellent resistance to hot solders, soldering irons, and most solvents.

Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Rohs Compliant. Does not cause premature wear of soldering iron tips. 09864 pack of 2 desco. Made of two Layer Rubber Material. Assembled in USA. Resistance-to-ground is 8 x 10e6 -10e8 and Resistance Point-to-Point is 2 x 10e6 -10e8.

Hakko 599B-02 Wire-type soldering iron tip cleaner #ad - 008 inches Thick. They help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. Industrial-grade wrist Strap】High safety, strong electrical conductivity can effectively make static electricity flow away. Adjustable wrist strap Buckle】 These wrist straps can be adjusted freely for your wrist comfortably.

Extra-long coiled cord】 line length 1.

#ad



Bertech ESD Metal Bench Mount Ground Block with 10 Ft. Cord

#ad
Bertech - BISS ESDGB #ad - Bertech esd metal bench Mount Ground Block offers the common ground point. Cleans better than conventional sponges. Excellent resistance to hot solders, soldering irons, and most solvents. It is suitable for factory environment, electronic maintenance, dust-free workshop and other static environment. Does not cause premature wear of soldering iron tips.

Rohs compliant: NA. Thixotropic paste; RoHS compliant. It is a good helper for electronic maintenance engineers. Superior fluxing ability. No water required. Kit includes a wrist strap and a grounding cord. Esd anti static safe: Designed for an electronic assembly where static charge is a concern. 008 inches Thick.

Bertech ESD Metal Bench Mount Ground Block with 10 Ft. Cord #ad - After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant. Compatible with lead free and leaded solder systems. The metal enclosed box mounts under the front edge of a workstation. Made of two Layer Rubber Material.

#ad



3M 3050 SNAP FASTENER, FEMALE

#ad
3M 126-503 #ad - After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant. Compatible with lead free and leaded solder systems. Rohs compliant: NA. Instant wetting. Assembled in USA. Does not cause premature wear of soldering iron tips. Esd anti static safe: Designed for an electronic assembly where static charge is a concern.

10mm snap. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms. 10/pk. Made of two Layer Rubber Material. Socket, long & short screws & esd common Point Ground Symbol Label For Use With: Antistatic Mats. Kit includes a wrist strap and a grounding cord. 09864 pack of 2 desco. Each kit contents: 10mm Stud, 10mm.

3M 3050 SNAP FASTENER, FEMALE #ad - Cleans better than conventional sponges. Resistance-to-ground is 8 x 10e6 -10e8 and Resistance Point-to-Point is 2 x 10e6 -10e8. It is a good helper for electronic maintenance engineers. Superior fluxing ability. No contamination risk compared to conventional tip tinners.

#ad



500 ESD Labels 2x2 Attention Electrostatic Sensitive Devices Static Warning Stickers

#ad
Labels and More #ad - Two banana jack receptacles for secure ground connections. As well, we offer bulk pricing. Self-stick For Easy Application. Labels per Roll: 500 It is a good helper for electronic maintenance engineers. Superior fluxing ability. Female snap fastener. Surface resistivity: top layer: 2 x 10e6 - 10e8 ohms, Bottom Layer: 8 x 10e6 - 10e8 ohms.

Made in USA. It is suitable for factory environment, electronic maintenance, dust-free workshop and other static environment. Kit includes a wrist strap and a grounding cord. Cleans better than conventional sponges. The metal enclosed box mounts under the front edge of a workstation. It also includes two parking studs 4mm for storing cords when not in use.

500 ESD Labels 2x2 Attention Electrostatic Sensitive Devices Static Warning Stickers #ad - Instant wetting. No contamination risk compared to conventional tip tinners. Esd anti static safe: Designed for an electronic assembly where static charge is a concern. Does not cause premature wear of soldering iron tips. Rohs compliant: NA. Industrial-grade wrist Strap】High safety, strong electrical conductivity can effectively make static electricity flow away.

#ad



Bertech ESD Mat Roll 2' Wide x 10' Long x 0.093" Thick, Blue

#ad
Bertech 1059-2x10B #ad - Self-stick For Easy Application. Will not reduce the tip temperature. Alert shippers that contents of packages are static sensitive. Made in USA. Made in USA. It is a good helper for electronic maintenance engineers. Superior fluxing ability. These esd mats are low cost, easy to cut, durable, and are reversible. Labels per Roll: 500

Bertech esd mats are made of a single layer polymer mix. Industrial-grade wrist Strap】High safety, strong electrical conductivity can effectively make static electricity flow away. Adjustable wrist strap Buckle】 These wrist straps can be adjusted freely for your wrist comfortably. Extra-long coiled cord】 line length 1.

Bertech ESD Mat Roll 2' Wide x 10' Long x 0.093" Thick, Blue #ad - 9m, full of flexible, it can effectively increase the optimal freedom of movement. Stainless steel alligator clip 】Strong clamping force, firm and not easy to fall off, improve work efficiency. Wide range of applications】anti-static wristband is an economical and practical model introduced by VASTAR. It is suitable for factory environment, electronic maintenance, dust-free workshop and other static environment.

Assembled in USA. Rohs Compliant.

#ad