Radar Detector DC Cigarette Lighter Plug with 2 USB Charging Ports | Replacement Power Adapter for Escort Valentine One Uniden Beltronics and More 6ft Coiled Wire

2x illuminated usb port - charge your mobile devices. The gold label detailing radar detector Cigarette Plug Wire is the perfect replacement or additional power cable for most radar detectors on the market. Cigarette lighter plug - No Need To Cut And Solder Wires. 6ft coiled cable - Replace The Original Shorter Wire.

Also available in 10ft straight wire. Over draw protection - Built In Fuse For Protecting Your Devices. Compatible with all rj11 power port utilizing radar detectors such Escort Passport and Max, Uniden, Valentine One, Beltronics and more. With the built in 2 illuminated USB ports, you can charge your mobile accessories with at the same time.

.

ChargerCity Car Dashboard & Windshield Suction Cup Mount Holder for Escort Passport 9500ix 9500i 8500 8500x50 S55 S75g Solo S2 S3 and Beltronics GX65 RX65 Vector 975 Radar Detectors ...

Compatibility: s75 s75g s55, solo s3, pro 100, vector 955, vector 895 & express 795, passport 9500i, newer vector 940, gx65, v6, pro 300, new passport, v8, rx55, vector 965, rd-5110 passport 7500s, v10, rx65, passport 8500x50, sti magnum, gx55, 5000, passport 8500, passport 7500, Solo S2, Pro 500, sti driver, v12, vector 995, 4600, 6800, 4500, passport 9500ix, pro 200, and 4200.

Compatible with passport x70 x80, beltronics vector 995, rx65, passport s55, most rocky mountain Phantom-T. Our mount has the metal clip that inserts into the radar detector, just like the one you received with your radar detector. Also unlike the original suction cup mount, this one has an adjustment point so that you can change the angle of the device.

. Our mount is compatible with the following radar models : escort and beltronics radar detectors, solo s3, 4500, sti driver, v8, and 4200please note this mount is not compatible with escort max series, pro 200, pro 500, vector 995, passport iq, gx55, passport 8500, gx65, v6, 5000, passport 9500ix, escort ix, vector 895 & express 795, Passport 9500i, Newer Vector 940, Passport 7500S, Passport 8500x50, 4600, Pro 100, Pro 300, including S75 S55, Solo RD-5110, Solo S2, Vector 965, New Passport, V10, V12, Passport 7500, RX55, RX65, Vector 955, 6800, STi Magnum, SmartRadar or REDLINE models Brand new in chargercity NO FUZZ NO MESS Packaging.

The mount has the metal clip that inserts into the radar detector with an adjustment point so that you can change the angle of the device. Unlike the one you received with your radar detector, this mount has a single extra large suction cup that's vacuum attached to your windshield or Your Dashboard using the provided dash disk.

Unlike the one you received with your radar detector, this mount has a single extra large suction cup that's vacuum attached to your windshield or with the included dashboard disk, you can place this mount right on your dashboard. Not compatible with escort max series & New Escort iX Series ***.

BELTRONICS & ESCORT RADAR DETECTORS WINDSHIELD Bracket Mount w/3 clear suction cups

Very cold weather, very hot weather, windy or bumpy roads etc. The suction cups are specially made and designed for strong attachment to the windshield for all sorts of climates and bumpy roads. This specially designed bracket holds 3 suction cups, providing you a more secure way to attach you Escort and Beltronics and Escort Radar to your car windshield.

Not compatible with escort max series & New Escort iX Series ***. Please note that this bracket will not fit Passport Escort Max radar detector,, this model requires a bigger bracket. Brand new in chargercity NO FUZZ NO MESS Packaging. This mount and suction cups are the perfect fit, holding tight no wobble and also will not easily Fall Off under any weather conditions Is about time to get a new set of brackets! The old mount for your Escort Passport & Beltronics might be falling off the windshield causing your radar to fall and break! A new Bracket with now three 3, not only 2 suction cups will either completely resolve this issue.

Compatibility: s75 s75g s55, passport 8500, pro 200, passport 9500ix, rd-5110 passport 7500s, new passport, v12, newer vector 940, pro 100, pro 300, v6, rx55, 6800, sti driver, passport 9500i, solo s3, vector 895 & Express 795, 4500, vector 995, Passport 8500x50, gx55, gx65, Pro 500, 4600, Solo S2, sti magnum, rx65, vector 955, Vector 965, v8, v10, 5000, passport 7500, and 4200.

Compatible with passport x70 x80, beltronics vector 995, rx65, passport s55, most rocky mountain Phantom-T. Many customers also get one for their other car. The mount has the metal clip that inserts into the radar detector with an adjustment point so that you can change the angle of the device. Beltronics gx65, 7500s, radar pro 100, pro gx65, c65 escort passport redline radar laser detector solo s2 solo-s2 escort passport radar solo s3 solo-s3 escort passport, pro 300, rx55 radar beltronics sti driver radar, rx65, 7500, 8500 Escort Passport Radar 6800, Pro 500 Vector V965 895 Radar Escort Passport iQ Radar 9500ix 9500i Escort Passport Radar 8500 X50, Pro 200, Beltronics PRO STi Magnum Radar Pro RX55, Escort Passport SC55 Radar.



Super Suction Sticky Windshield Suction Cup Mount for Escort MAX / MAX2 MAX 2 MAX II/MAX 360 MAX360 Radar Detector NOT for MAX360C That use Magnetic Cradle, Metal Slide in Plate Connection only

New and improve perfect fit metal slide in cradle that will not vibrate or shake during driving. Unlike the one you received with your radar detector, this mount has a single extra large suction cup that's vacuum attached to your windshield or Your Dashboard using the provided dash disk. Please note that this mount is only compatible only with passport max /max2 /max 360 series radar detector only not for 360c metal slide in plate connection only NOT FOR MAX360C MAGNETIC cradle radarPlease Note If notice decrease in suction cause by dust on sticky base, please rinse w/mild liquid soap in water then allow it to air dry to restore suction Brand new in chargercity NO FUZZ NO MESS Packaging.

Not compatible with escort max series & New Escort iX Series ***. Please note that this bracket will not fit Passport Escort Max radar detector,, this model requires a bigger bracket. Brand new in chargercity no fuzz no meSS Packaging ** Manfuacture Direct Replacement Warranty**. The sticky suction base uses a powerful combination of polyurethane gel and suction to provide a maximum surface bond.

If it has a drop in suction, just rinse the pad with a mild liquid soap and warm water, and then let air dry to restore the suction. The mount has the metal clip that inserts into the radar detector with an adjustment point so that you can change the angle of the device. Easy to install with adjustment thumb screw knob to lock radar into position, Superior performance under extreme heat and cold weather.

Compatible with only with escort pasport max, max2 max ii 2 max360 radar detector metal slide in Plate connection only NOT FOR MAX360C MAGNETIC cradle radar.

Coiled Power Cord for Beltronics / Escort / V1 Radar Detectors

Easy to install with adjustment thumb screw knob to lock radar into position, Superior performance under extreme heat and cold weather. Unlike the one you received with your radar detector, this mount has a single extra large suction cup that's vacuum attached to your windshield or Your Dashboard using the provided dash disk.

Coiled power cord for beltronics, Escort and Valentine Radar Detectors with RJ-11 "telephone style" jack. Telephone style plug. Compatibility: s75 s75g s55, pro 200, rd-5110 passport 7500s, 4600, passport 8500x50, sti magnum, sti driver, rx55, pro 500, passport 9500ix, 4500, v6, vector 965, solo s3, vector 995, 5000, pro 300, gx55, passport 8500, gx65, Vector 895 & Express 795, new passport, v10, v12, Newer Vector 940, passport 9500i, rx65, vector 955, passport 7500, v8, 6800, pro 100, Solo S2, and 4200.

Compatible with passport x70 x80, rx65, beltronics vector 995, passport s55, most rocky mountain Phantom-T. Beltronics. Brand new in chargercity NO FUZZ NO MESS Packaging. 90 day warranty. Valentine One. Compatible with only with escort pasport max, max2 max ii 2 max360 radar detector metal slide in Plate connection only NOT FOR MAX360C MAGNETIC cradle radar.

Escort.

Suction Cups for Cobra, Escort and Beltronics Radar Detector - Set of 8

Fits all cobra, escort and Betronics radar detectors that use 2 suction cups. Unlike the one you received with your radar detector, this mount has a single extra large suction cup that's vacuum attached to your windshield or Your Dashboard using the provided dash disk. Valentine One. New and improve perfect fit metal slide in cradle that will not vibrate or shake during driving.

Suction cups fit all cobra, Escort and Beltronics Radar Detector mounting brackets that use 2 suction cups. Not for mounting brackets that use 3 suction cups. Suction cups are slightly larger than Original Manufacture and stick great! Compatible with only with escort pasport max, max2 max ii 2 max360 radar detector metal slide in Plate connection only NOT FOR MAX360C MAGNETIC cradle radar.

. Polyurethane gel sticky base Strong adherence to the windshield Non Permanent, Resuable Suction Base. Not for mounting brackets that use 3 suction cups. Easy to install with adjustment thumb screw knob to lock radar into position, Superior performance under extreme heat and cold weather. Escort. Ships usps first Class Mail next day with tracking.

Not compatible with escort max series & New Escort iX Series ***.

Arkon Radar Detector Car Windshield Mount

Escort. Beltronics. Valentine One. Telephone style plug. Ships usps first Class Mail next day with tracking. Compatible with most Escort, Beltronics and Rocky Mountain Phantom-T radar detectors. Arkon's rdmet01 radar detector windshield mount is compatible with most rocky mountain phantom-t, vector 995, sti magnum, newer vector 940, solo 4, redline, solo rd-5110, gx55, gx65, 5000, solo s3, sti driver, v8, rx65, passport 9500ix, 4600, passport 7500s, rx55, 6800, solo s2, vector 955, Vector 965, V10, Pro 100, Vector 895 & Express 795, New Passport, Passport 7500, Pro 200, V12, Escort and Beltronics radar detectors, Passport 8500x50, Solo 5, Passport 8500, Passport 9500i, including S55, Pro 300, V6, 4500, Pro 500, and 4200.

2 year limited warranty. Compatibility: s75 s75g s55, gx65, v8, sti driver, v12, solo s2, rx55, pro 200, passport 8500x50, passport 8500, pro 300, pro 500, vector 995, passport 9500ix, new passport, 5000, vector 895 & express 795, passport 9500i, Vector 965, pro 100, 4500, gx55, 4600, RD-5110 Passport 7500S, sti magnum, rx65, passport 7500, Newer Vector 940, 6800, v6, vector 955, solo s3, v10, and 4200.

Compatible with passport x70 x80, beltronics vector 995, passport s55, rx65, most rocky mountain Phantom-T. Radar detector not included Brand new in chargercity NO FUZZ NO MESS Packaging. Compatible with only with escort pasport max, max2 max ii 2 max360 radar detector metal slide in Plate connection only NOT FOR MAX360C MAGNETIC cradle radar.

Suction cups fit all cobra, Escort and Beltronics Radar Detector mounting brackets that use 2 suction cups. Not for mounting brackets that use 3 suction cups.

Super Sticky Suction Windshield Suction Cup Mount for Escort Solo S2 S3 S55 s75 s75g Passport 8500X50 x70 x80 8500 9500 STi Magnum and Beltronics RX-65 GX65 Vector 995 975 965 940 Radar Detectors

Superior performance under extreme heat and cold weather. Brand new in chargercity no fuzz no meSS Packaging ** Manfuacture Direct Replacement Warranty**. Compatible with only with escort pasport max, max2 max ii 2 max360 radar detector metal slide in Plate connection only NOT FOR MAX360C MAGNETIC cradle radar.

Escort. Polyurethane gel sticky base Strong adherence to the windshield Non Permanent, Reusable Suction Base. Easy to install with adjustment thumb screw knob to lock radar into positiom, Superior performance under extreme heat and cold weather. Compatibility: x70, solo s2, vector 895 & express 795, vector 965, v6, v8, rx55, sti driver, vector 955, new passport, v10, gx65, solo rd-5110, sti magnum, gx55, passport 7500s, pro 500, pro 300, newer vector 940, v12, passport 9500i, s55 s75, passport 8500, 4600, Passport 7500, Vector 995, 5000, Pro 100, Passport 9500ix, Passport 8500x50, 4500, Solo S3, RX65, 6800, Pro 200, and 4200.

Not compatible with max, just rinse the pad with a mild liquid soap and warm water, max2, MAX360 OR IQ RADAR DETECTORSIf it has a drop in suction, and then let air dry to restore the suction. The mount has the metal clip that inserts into the radar detector with an adjustment point so that you can change the angle of the device.

Chargercity super suction beltronics and Escort Radar Detectors Bracket Mount w/New and improved metal bracket that prevent shaking during usage. New and improve perfect fit metal slide in cradle that will not vibrate or shake during driving. 2 year limited warranty.

Digipartspower Car Adapter For Valentine One V1 Radar Laser Detector Auto Power Cord DC Charger

We would be glad to solve any problem for you within 24 hours. Ocp: over Current output Protection. In great Working Condition. Check connector Photo to Ensure Compatibility. 30 days money back Guarantee if you are not satisfied with our products. We focus on providing quality power products and excellent customer service / we will ship your order within-24 hours Mon - Fri, pls feel free to contact with us if any concern.

Ovp, ocp, scp protection ovp: over voltage output protection. Brand new in chargercity no fuzz no meSS Packaging ** Manfuacture Direct Replacement Warranty**. Polyurethane gel sticky base Strong adherence to the windshield Non Permanent, Reusable Suction Base. New and improve perfect fit metal slide in cradle that will not vibrate or shake during driving.

Locate the order and click the "Problem with this order?" button. Compatibility: s75 s75g s55, pro 500, passport 8500x50, v10, 6800, new passport, gx55, rx65, pro 300, v12, sti magnum, rx55, gx65, vector 995, vector 895 & express 795, passport 9500i, pro 100, newer vector 940, passport 9500ix, v8, 5000, 4500, vector 955, passport 7500, Solo S2, sti driver, passport 8500, RD-5110 Passport 7500S, pro 200, 4600, solo s3, v6, Vector 965, and 4200.

Compatible with passport x70 x80, beltronics vector 995, passport s55, rx65, most rocky mountain Phantom-T. Superior performance under extreme heat and cold weather. Please make sure the DC output and tip size of ac adapter are accordant before you order.

Escort EZ Mag Mount - Black, Powerful Magnetic Anchor Plate with StickyCup Silicon Suction Cup

Not compatible with escort max series & New Escort iX Series ***. Please note that this bracket will not fit Passport Escort Max radar detector,, this model requires a bigger bracket. Easy to install with adjustment knob. New and improve perfect fit metal slide in cradle that will not vibrate or shake during driving.

The ez mag mount grasps the powerful magnetic anchor plate on compatible detectors, utilizing the tried-and-true StickyCup silicon suction cup to adhere to the windshield. Valentine One. Brand new in chargercity no fuzz no meSS Packaging ** Manfuacture Direct Replacement Warranty**. Not compatible with passport iq, max2, ex, smartradar, max, MAX360 or any other brand Radar Detector.

Our products are ce / rohs certified, tested by the manufacturer to match and / FCC / or exceed the OEM specifications, Digipartspower Made with the Highest Quality / Brand-new. Note:pls make sure the output and tip size is correct. Escort compatible - ez mag mount is compatible with these Models ONLY, Max 360c, Escort IXc, Escort IX, and Redline EX.

Giftable and giveable - spread love this holiday season by giving your loved one a holiday gift that keeps on giving! There's no time like the present for you to show how much you care by gifting someone with the ultimate accessory for driver protection! Polyurethane gel sticky base Strong adherence to the windshield Non Permanent, Resuable Suction Base.

Superior performance under extreme heat and cold weather.