Top 10 Clock Mechanism Short Hands – Wall Clocks

As an Amazon Associate I earn from qualifying purchases.

1. Outus

#ad

2 Pieces Quartz Clock Movement Mechanisms Non Ticking Clock Mechanism with 8 Clock Hands Sets of DIY Movement Kits Replacement 13 mm

#ad
Outus #ad - Package includes: you will get 2 pieces clock quartz movement mechanisms with 2 sets of accessories, and 8 sets of different pointer kits; There are various styles to choose which is very suitable for different styles of clock frames. 6 mm/ 024 inch; the clock movement mechanism are suitable for 1 - 3 mm/ 004 - 012 inch thickness of clock panel, when you install this clock movement kit, and clock hands fit clock face 25 - 35 cm in diameter, please check the sizes.

13 mm/ 05 inch, and the thread length is approx. Quality material: the movement is made of abs material, which is light in weight and corrosion-resistant, and the clock hands are made of quality aluminum, sturdy for a long time to use, providing you with nice use and decorative effect.

Widely applicable: these clock repair replacement parts are suitable for cross-stitch, frame-less wall clocks, 3 dimensional embroidery, craft clocks, especially for DIY quartz wall clock to replace for using. Size: the total shaft length is approx. Clock design: the design of the clock hands are simple and stylish which have a various styles; The long-axis clock mechanism provides accuracy and reliability, and there is no ticking sound provides you with a quiet environment.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-1338
ModelOutus-1333

2. Mudder

#ad

9/10 Inch Total Shaft Length Red, Mudder Long Spindle Quartz Clock Mechanism, 1/2 Inch Maximum Dial Thickness

#ad
Mudder #ad - Jump second movement, suitable for 9 - 13 mm 9/ 25 - 1/ 2 inches thickness clock panel; Total shaft length: 23 mm 9/ 10 inches, thread length: 15. 4 mm 3/ 5 inches.

Wide application: you are enable to use it to repair, three-dimensional embroidery, frameless draw clock, craft clock, replace or make a clock; Applicable to cross-stitch, etc. Simple style clock movement: it can match to diverse colors, shapes clock panel, it will not stand out, patterns, good movement will work well. Long spindle quartz clock replacement movement parts: the clock hand is rectangle shape, red color allow you to get the time even if you stand far away. Note: this clock doesn't contain hook, they can't hang directly; If the handle is too long, you can snip them as you want according to the size of the clock panel.
BrandMudder #ad
ManufacturerMudder #ad
Height0.63 Inches
Length2.17 Inches
Weight0.08 Pounds
Width2.17 Inches
Part NumberMudder-Quartz Clock-01

3. Mudder

#ad

31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit Black

#ad
Mudder #ad - 7 mm 028 inch; please check the size before buying. Movement size: shaft length is 31 mm 1-1/ 5 inch; thread length is 24. 6 mm 24/ 25 inch; jump second movement, suitable for 16 - 21 mm 5/ 8 - 4/ 5 inch thickness clock panel.

90 mm 3. 5 inch; minute hand is approx. 120 mm 4. 7 inch; Second caps is approx. Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs. Center of hole hand size: hour hand is approx. Warm notice: when you install it, please keep the hour hand and minute hand parallel. Wide application: they are fit for cross-stitch, and specially suitable for DIY quartz wall clock replacement movement parts, three-dimensional embroidery, craft clock, frame-less draw clock, etc.
BrandMudder #ad
ManufacturerMudder #ad
Weight0.09 Pounds
Part Number43216-77972

4. Outus

#ad

4 Pieces Quartz Clock Movement Mechanism Non Ticking DIY Clock Mechanism with 6 Clock Hands Sets for Repair Parts Replacement 18 mm, Black, Gold

#ad
Outus #ad - 18 mm/ 071 inch, and the thread length is approx. Clock design: the design of the clock hands are simple and fashionable which have a various styles, and the color is classic and does not fade; The long-axis clock mechanism provides accuracy and reliability, and and there is no ticking noise to interrupt your work or rest, providing you with a quiet environment.

11 mm/ 043 inch; the clock movement mechanism are suitable for 4 - 7 mm/ 016 - 028 inch thickness of clock panel, and clock hands fit clock face 25 - 35 cm in diameter; Please keep the hour hand and minute hand parallel when you install this clock movement kit. Widely applicable: these clock replacement parts can be applied in office, restaurant, classroom, library and other occasions, and also suitable for cross-stitch, bedroom, frameless wall clocks, craft clocks, living room, quartz wall clock to use.

Size: the total shaft length is approx. Quality material: the movement is made of abs material which is sturdy and durable for a long time, and the clock hands are made of quality aluminum, which is light in weight and corrosion-resistant to provide you with nice use and decorative effect. Package includes: you will get 4 pieces quartz clock movement mechanisms with 4 sets of accessories, and 6 sets of different pointer kits; There are various styles to choose, which is very suitable for different styles of clock frames.
BrandOutus #ad
ManufacturerOutus #ad
Part NumberOutus-Clocks-T1155

5. ULTNICE

#ad

ULTNICE Quartz Clock Mechanism Battery Operated DIY Wall Clock Movement Repair Parts

#ad
ULTNICE #ad - Diameter : the minute shaft diameter is 3. 6-3. 7mm, and the Hour Shaft Diameter is 5. 5mm. Screw shaft Diameter 7. 6mm. Powered by 1 aa batterynot included, carbon batteries, You can use No. 5 aa batteries, alkaline batteries.

Thank you for your understanding!!! Please note: please measure the shaft of you clock mechanism you need before buying ! For diy quartz wall clock replacement movement part, applicable framless 3D Wall clock. The total length of the shaft is 12mm, and the length of the yellow spiral is 5mm. The error is less than +-1. 5 seconds/day, and the power consumption is less than 200 microamps.

Size about : 5. 6 x 5. 6 x 1. 5cm/2. 2 x 2. 2 x 06inch. Important : this model is a 5mm ordinary shaft, otherwise the front nut cannot be tightened and the clock cannot run ! !Due to different measuring tools and measuring methods, which is suitable for clock panel thickness of not more than 4mm, the measured length may be slightly different from the actual one.
BrandULTNICE #ad
ManufacturerULTNICE #ad
Height0.63 Inches
Length2.2 Inches
Weight0.02 Pounds
Width2.2 Inches
Part Number21F2118PVNU
Model21F2118PVNU

6. Dans Clock Shop

#ad

New Replacement 6168s Sangtai Non Ticking Quartz Clock Movement Mechanism Motor Short, 6mm Gold Thread

#ad
Dans Clock Shop #ad - Complete with all fittings, fully tested with fitting instructions, ROHS approved. Non ticking - second hand sweeps rather than ticks for a quieter. Movement dimensions - height 70mm 55mm with hanger removed - width 55mm - Depth 16mm. Please note that movements are compatible with quartz press fit hands with a shaft size for the hour hand 5. 5mm and minute hand 3. 6mm. Movements suitable for hand sizes up to 130mm, high torque movements are needed for larger hands and are available from my shop.
BrandDans Clock Shop #ad
ManufacturerQuartz #ad
Part Number7426974064740

7. Hicarer

#ad

Hicarer DIY Large Clock Hands 3D Wall Clock for Kitchen Office and Home Art Decor Quartz Clock Movement Mechanism Accessories

#ad
Hicarer #ad - Kindly reminder: there is only one minute hand and one hour hand; After putting battery in, you must spend 5 minutes to test the clock move or not; Powered by 1 x 1.

5 v aa battery not included. 203 mm/ 8. 0 inches long; the minute hand is about 305 mm/ 12 inches in length; Second cap: approx. 70 cm/ 30 inch. 7 mm/ 03 inch,please check the size before purchase. Center of hole hand size: the hour hand is approx. Home decoration: you can diy a simple clock as wonderful decoration, kitchen, then hang and stick it on the wall in bedroom, living room or office. Material: the clock pointer is made of aluminum, please do not use too much pressure to avoid bending. Size: you can apply the clock movement kit to DIY a wall clock, and its mini size is approx.
BrandHicarer #ad
ManufacturerHicarer #ad
Height0.79 Inches
Length16.73 Inches
Weight0.3 Pounds
Width3.94 Inches
Part NumberHicarer-Clock Movement-01

8. AILILIFE

#ad

Aililife 3D Clock Hands, 3D Wall Clocks Home Decor, DIY Large Clock Movement Mechanism with 12 Inch Long Spade Hand

#ad
AILILIFE #ad - Our service: we believe you will love this 3d clock hands, If there is any problems, please feel free to contact us. Silence movement - silent sweeping, mute movement 3d clock hands will give you a quiet night.

Enjoy the diy - 3d clock hands has an open design with just minute and hour hands. You can design your clock and room according to your habits, or share your design process with friends and family. Our friendly customer service will be always with you whenever you need our technical support. Main function - applicable to cross-stitch, three-dimensional embroidery, craft clock;suitable for quartz clock repairing, replacing or making a clock£¬Large clock hands also can be used as a wall decoration.

Unique design - 3d clock hands fit clock dial over 25" diameter, easy and simple design with mute scanning movement, Introducing from high-technology which maximum reducing power consumption and effectively extending the life of the movement. No harm to the environment and health.
BrandAILILIFE #ad
ManufacturerAililife #ad
Weight0.6 Pounds

9. SANGHAI

#ad

SANGHAI Clock Movement Silent Quartz Clock Movement Long and Short Shaft Clock Mechanism with Hands Battery Powered Wall Clock Mechanism Parts

#ad
SANGHAI #ad - Several kinds of hands with different styles and lengths: This kit comes with pairs of clock hands with different styles and lengths for you to choose from, which is very suitable for making and repairing clocks, and also has a decorative effect.

Suitable for diy quartz wall clocks, frameless wall clocks, metal wall clocks, replacement of bad clocks, craft clocks, wooden wall clocks, etc. Accurate and quiet: the long-axis clock mechanism provides extremely high accuracy and reliability, and the motion is equipped with no ticking sound, thus providing you with a quiet environment. Packageincludes:1 set DIY clock kit. These replacement parts are very suitable for different styles of clock frames and are very suitable for repairing, replacing, or manufacturing clocks by yourself.
BrandSANGHAI #ad
ManufacturerSANGHAI #ad
Part NumberSANGHAI

10. Orange County Clocks

#ad

Quartz Clock Mechanism Movement Kit with 3" Black Spade Hands for Dials up to 3/16"

#ad
Orange County Clocks #ad - Size: 2 7/32 Square. Total shaft length of 5/8" Without Second Hand. Quartz clock movement with Hands, Second Hand, and Built In Wall Hanger. One set of hands & second hand included Minute hand measures 3" from mounting hole to tip. Max dial thinkness 3/16".
BrandOrange County Clocks #ad
ManufacturerOrange County Clocks #ad
Height2.01 Inches
Length5.98 Inches
Weight0.11 Pounds
Width3.5 Inches
Part NumberQtx3/16-B/blksec
ModelAX-AY-ABHI-112673