Top 8 Check Valve 1/2 Inch – Pipe Fittings

As an Amazon Associate I earn from qualifying purchases.

1. SharkBite


PEX, CPVC, Copper, Push-to-Connect, SharkBite U2008-0000LFA 1/2 inch x 1/2 inch Brass Check Valve

SharkBite #ad - Lead free Compliant. Installs in seconds: requires no special tools, no soldering, or glue. Quality: sharkbite quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection.

Copper, cpvc: shark bite water heater line plumbing fittings fit Copper, PEX, PEX, CPVC and PE-RT. Shark bite is the only push-to-connect brand than can ensure a clean, leak-free connection. Quality: only shark bite's quality and performance is field-proven with more than 550 million connections.

Use for both hot and cold water heater supply lines. Just push to create a watertight seal. Certified: sharkbite fittings are certified to 200 PSI and 200°F and can be reused up to four times. No soldering, unions, clamps, or glue required. Connects copper, peX, and CPVC pipe in any combination. Designed for vertical and horizontal installation.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height2.6 Inches
Length1.06 Inches
Weight0.05 Pounds
Width1.06 Inches
Part NumberU2008-0000LFA
WarrantyLimited 25 Year

2. TIB


TIB Performance 304 Stainless Tri Clamp Clover Inline Check Valve, Sizes 3/4" to 3"" O.D Tube 2 1/2" O.D.

TIB #ad - Manufactured to meet 3A specifications. 250 psi max operating pressure rating, at 70 degrees F ambient temperature. Polished finish. Rust, corrosion resistant. 304 grade stainless.
BrandTIB #ad
ManufacturerXWORKS #ad
Part NumberTCCV63

3. Superior Pump


Plastic, Fits all 1-1/4-Inch or 1-1/2-Inch MIP or FIP, Superior Pump 99555 Universal Check Valve

Superior Pump #ad - Kit includes check valve and two adapters. Made from durable ABS plastic. High quality Nitril-Bruna N seal. Universal design works with multiple applications. Water pressure limit: Max 11 psi. Will fit any 1-1/4-inch or 1-1/2-inch NPT male or female thread.
BrandSuperior Pump #ad
ManufacturerSuperior Pump #ad
Height7 Inches
Length2.75 Inches
Width2.75 Inches
Part NumberSUP-99555
Warranty1 Year Limited Warranty

4. AY McDonald


AY McDonald 4424-100 2069C 1 1/2 Clear Silent Check Valve

AY McDonald #ad - Eliminates the typical hammering of a sump check valve after the pump cycles. All valves are pressure tested to ensure Leak-proof performance. Stainless steel clamps included.
BrandAY McDonald #ad
ManufacturerAY McDonald #ad
Height11.38 Inches
Length3 Inches
Weight0.82 Pounds
Width3 Inches
Part Number4424-100

5. Little Giant


Little Giant 89695 CV-10 Condensate Pump Check Valve for VCC, VCMA and VCL-14/24, 1/4-inch MNPT x 3/8-inch Barbed, VCM, Black

Little Giant #ad - Fittings: designed to work with pumps with a 1/4-inch fnpt pipe fitting and 3/8-inch vinyl tubing; the check valve is 1/4-inch MNPT on one end and. 430-inch barbed on the other end. Designed for little giant condensate removal pumps: this check valve works specifically with only Little Giant's VCL-14/24, VCMA and VCC Series condensate pumps to keep condensate from draining back into the system. Material: check valve body and seat is made of acetal, O-ring is made of nitrile, ball is made of Buna-N.
BrandLittle Giant #ad
ManufacturerLITTLE GIANT #ad
Height0.5 Inches
Length6 Inches
Weight0.04 Pounds
Width4.5 Inches
Part Number599065
Warranty1 Year Limited Manufacturer

6. HFS


1/4IN, 1/2IN, HFS 110v Ac Electric Solenoid Valve Water Air Gas, 3/4IN, 1IN NPT Available 110V AC 1IN NPT, Fuels N/c

HFS #ad - Size: 117mm*86mm 4. 606 '' * 3. 386 '', interface pipe diameter: 1 '' npt thread, thread diameter: 32mm 1. 26 '', flow diameter: 25mm 0984 ''. Wide application: applicable temperature: - 5 ℃ ~ 80 ℃, water, Working environment: air, oil: 0 ~ 5kgf/cm2, air: 0 ~ 7kgf/cm2, working pressure: water, oil and gas.

Material: the product is mainly made of cast copper with copper coil, which improves the strength and applicability of the valve. If more than half an hour will begin to appear heating state, try to let it rest for half an hour before working.

Matters needing attention: as the product is normally closed solenoid valve, the working time shall not be too long, after the solenoid valve heating, and the working time is recommended to be less than half an hour. N/c: the solenoid valve is normally closed, which means it is closed when the power is not supplied, which effectively ensures the safety of use.
BrandHFS #ad
ManufacturerHFS #ad
Part NumberSLV-110-SERIES

7. SharkBite


HDPE, PEX, Copper, PE-RT, Water Valve Shut Off, 1/2 Inch x 1/2 Inch, CPVC, SharkBite 22222-0000LFA Ball Valve, Push-to-Connect

SharkBite #ad - Versatile: shark bite ball valve plumbing fittings fit Copper, CPVC, PE-RT, PEX, and HDPE Pipe and connects them in any combination. Quality: only sharkBite's quality and performance is field-proven.

Performance: sharkbite shutoff valves are are heavy duty and certified to sustain a pressure of 200 PSI and 200 degrees Fahrenheit. Installs in seconds: 1/2 inch ball water valve requires no special tools, no soldering, no crimping or glue; push-to-connect design provides an efficient application that saves time and money; just push to create a watertight seal. Preferred by the pro: All SharkBite fittings meet the same standards for commercial and residential plumbing applications.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height5.4 Inches
Length1.3 Inches
Weight0.42 Pounds
Width2.3 Inches
Part Number22222-0000LFA

8. The Original Safety Siphon


3.5 Gallons Per Minute Flow Rate, Pure Copper Check Valve by Original Safety Siphon, Great for Homebrewing and Wine Making, 1/2'' Multi-Purpose, Self-Priming, Lead Free

The Original Safety Siphon #ad - Fast flow rate of 3. 5 gallons per minute. Perfect for homebrewing and wine making. Made and manufactured in the U. S. A. Lead free, pure copper check valve contains a glass ball and stainless steel spring to prevent the backflow of liquids. 1 count original Safety Siphon 1/2" check valve. Easily connects to a 1/2 inch hose.
BrandThe Original Safety Siphon #ad
ManufacturerThe Original Safety Siphon #ad
Height0.5 Inches
Length2 Inches
Width0.5 Inches
Part Number12CVO