As an Amazon Associate I earn from qualifying purchases.
1. KegWorks #ad
5 lb Aluminum CO2 Air Tank #adKegWorks #ad
- Tanks are shipped empty. 5 lb aluminum CO2 air tank for dispensing draft beer. Brand new, not reconditioned. Made of high quality aluminum alloy, making it lighter than steel. Has a capacity of 6 - 8 half kegs.
2. Victory #ad
Victory 5lb CO2 Tank Aluminum Cylinder with CGA320 Valve #adVictory #ad
- Alloy: - manufactured from high strength aluminum alloy 6061-T6. Threads: - B5. Markings: - as required by specification, inclusive of tare weight. Service pressure: - 1800 psi / 124 bar. Finish: - standard finish is brushed body with unpainted crown.
3. Luxfer #ad
Brushed, Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve 5 LB #adLuxfer #ad
- Highly corrosion-resistant interior and exterior. Thick, consistent walls resist damage. Brushed external surface provides a low-maintenance finish.
Lightweight––up to 40 percent lighter than comparable steel cylinders. Minimum burst pressure tested to 2. 5 times service pressure without failure.
4. Beverage Elements #ad
5 lb. Aluminum CO2 Cylinder with CGA 320 Valve #adBeverage Elements #ad
- 1800 psi service pressure. Brushed aluminum external surface provides a low-maintenance finish. New cga320 valve.
5. Kegco #ad
Kegco B5-RED 5 lb. Aluminum Co2 Tank with Red Finish for Kegerator and Draft Beer Dispensing #adKegco #ad
- Stamped with required U. Eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Department of transportation and transport Canada markings.
All tanks ship empty. 320 valves are cga approved and have a male thread for Co2 regulators. S. Produced from high-strength corrosion resistant aluminum alloy 6061-t6. Features service pressure up to 1800 psi/124 bar with a test pressure of 3000 psi/207 bar.
6. Cyl-Tec #ad
Cyl-Tec CO2 Aluminum Cylinder with CGA 320 Valve, 5 lb #adCyl-Tec #ad
- High quality - sleek aluminum body. Federal law requires that this tank ship without being filled. New valve - includes new brass cga 320 co2 valve. The tank is stamped with these markings.
New old stock --5 lb co2 tank is Great for kegs or home brewing! Shipped empty - ships ready to fill empty. Aluminum tanks are corrosion-resistant and will not rust as steel tanks do over time.
320 valves are approved by the compressed gas association CGA and have a male thread for CO2 regulators. Dot/tc certified - 1800 psi service pressure. Once filled it can dispense 5-7 beer kegs.
The black hand wheel is made of plastic as a safety feature. A fire and therefore show that that the tank is no longer safe to use. Certified for use in the U. S. Dot and Canada T. C. Made from high quality 6061-T6 brushed aluminum to ensure durability. It will melt if the tank is exposed to extreme heat i.
|Model||CO2 Tank (5 lb)|
7. Brewmaster #ad
CO2 Tank 5 lb #adBrewmaster #ad
- Aluminum carbon dioxide Cylinder with CGA 320 valve installed. 1800 psi, dot-3al and tc-3alm designed, high strength aluminum alloy 6061-T6. 5. 25 inch diameter, 19. 2 inch length, 1. 125" unf inlet thread. 5 lb capacity, Shipped empty.
8. Kegco #ad
Kegco A-JTCVS-EC02-5 BF C5 Aluminum Co2 Tank, Silver #adKegco #ad
- Brand new, not reconditioned. Has a capacity of 6 - 8 half kegs. Tanks are shipped empty. 5 lb aluminum CO2 air tank for dispensing draft beer. Made of high quality aluminum alloy, making it lighter than steel.
9. Kegco #ad
Deluxe, Kegco BF EBDCK-5T Conversion Kit, 1 Faucet with Tank #adKegco #ad
- The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
Door mount stainless steel drip tray: our 6" x 4" door mount drip tray's clean design, a removable grill makes clean-up a breeze. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, durable stainless steel construction, so it will need to be emptied manually.
Includes empty 5 lb. Aluminum co2 tank: all of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust! These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and wear. Dual gauge regulator: durably constructed to deliver a consistent flow pour after pour, this kegco 762 Commercial Grade Double Gauge Regulator features a T-style adjustment valve that makes it easy to adjust the pressure inside of the keg.
Lever handle keg coupler: this nsf-approved kegco kt85d-l "d" system keg coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. A pressure release valve is conveniently located on the body. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them.